What to do if your mac screen goes black

The most possible reason for this problem is that a pin for the backlight close to the display is sticking out. If you can get the pin to reset, it will start working again. If you want the link to a youtube video describing the fix to a similar problem, just ask and i will send the link. Nov 7, 5: You would already have a fix by now I guess, but I had the same problem. I never knew that the ID button on the touch bar actually could be pushed down like a normal button I normally just place my finger on it to unlock the computer. This turned the computer off. Pushed it again and the computer started up like normal.

Boom fixed. Nov 7, 6: I have a similar issue with my wife's 17" Retina display. The computer boots up. Using Screen Sharing, I get a display that is almost square, like one would get with a headless Mac mini, rather than a display window proportional to x In addition, it does not recognize any external monitors.

I've tried disconnecting the battery, removing the solid state drive and booting off an external drive , and other standard trouble-shooting tips, but to no avail. I reinstalled the latest compatible OS I did manage to do an extended hardware check once when I had the display working, but it gave no hints of any problems. I am at a loss. One odd thing: After fiddling with it, it now says it is "Normal".

But I also get the problem with the battery disconnected. Dec 20, Dec 26, 5: Jan 3, 8: Jan 4, 8: Thank you for posting this solution. My Macbook Pro just went "black screen" this afternoon, for some completely unknown reason, but this fix really worked. Thanks again. Jan 6, 4: All you see is black screen on your MacBook Pro no matter what keys you are pressing. Could it be your cat stepping on keys? Use F1 and F2 buttons to light black screen on your Mac. Examine your charger cable is intact and if your Mac is charging.

Is the green light on?

More solutions if your MacBook Pro won’t turn on

To rule out the power issues, check if your Mac produces any noise — from the hard drive or fans. If you still see black screen on Mac, read on. Remove all external devices like printers or external drives. These devices may start their own dialogues which could interfere with your display settings.

The variance of this issue is your Mac not waking up after sleep. Try to open and close MacBook lid and press a few keys on a keyboard. Hold down the Power key for about 6 seconds. Wait for your Mac to shut down and press the Power key again. NVRAM stands for non-volatile RAM and is basically a functionality that stores in memory settings for display, speakers, primary startup disk etc.

Thank you soooo much. Best guess: I have been using the number keys quite alot so I guess I was also hitting the brightness key accidentally and repeatedly until I hit one too many times without realizing it and turned the screen completely black. PRAM worked for me!! Thank you so much, I have an exam in two days and all my notes had been on there. Any others ideas? Thank you, thank you! PRAM worked for me, it keeped resetting for a few mins and it turned on out of nowhere. I had tried so many different websites and i was about to give up!

The black screen happend 2 me 2. At first I tried all the above tricks to no avail. I have had my Macbook Pro for a few years now. This is the second time in the past few weeks that I have had this black screen issue. The first time the SMC reset worked perfectly. The last time my screen went black, I had to try all three solutions several times, and finally the SMC reset worked. This makes me feel that there is something wrong with my Mac that needs repaired.

I have never had this issue before a few weeks ago, and never on my previous Mac. The article says that this is rare, but it has happened twice now recently. Would upgrading to El Capitan help? I held it down 8 seconds, and it should be done before seeing any light source in the display. So hopefully no more issues! Maybe a DC board problem?

I had the same issue. I carry my laptop to and from each and connect via the display ports. One day, i walked away from workstation for an hour or so, came back and saw my laptop screen was black. I figured it went to sleep, so i just closed the lid, packed it up and went home. When I got home, I opened up my laptop and did not get an image, just a black screen.


  • Bonus Tip: How to Remove Mac Junk with MacClean.
  • install mcrypt mac os x mountain lion.
  • wiz khalifa mac and devin soundtrack.
  • How to fix MacBook Pro with black screen? - Apple Community;

After about an hour, of troubleshooting and reading forums Including this one , I figured the GPU died. I figured it was surely dead now. I got a hunch to reconnect it at my 2nd workstation, the one I had left it the night before, and bam. Picture came up on the retina! It was scrambled, very bad picture, but at least it was a start. I disconnected and reconnected the display ports, but no luck.

With the connections in, I closed the lid and reopened, but still no luck. I immediately disconnected the display ports, and the screen is working nicely. You rock Michael. I had this problem and it was still being black after trying all kinds of tricks and methods but i got it running from a different display. Something to do with the component that keeps the lisghts and adjusts the screen. All the best and hope you find your solution! I was watching Netflix on my Macbook when the screen went black. Upon doing a hard reset Holding down the power button fro 5 seconds , the Mac grey screen would show up but then it would go black.

That did the trick and the screen came back on. Another option for people with this problem. Tried all three suggestions and none worked. Restarted in Safe Mode press and hold Shift key while reboot computer until you get to Login screen and had my laptop connected to our TV using an HDMI cable so I could at least see if the computer was working, which it was, but just not my laptop display. So I installed the update, restarted computer, and voila! Try this out as an option before taking it into an Apple Store.

Hi thanks for this! The last option worked for my daughter after trying all the preceding solutions. Happened to me before on Yosemite with my Mac mini. Apparently I too, as a way of troubleshooting,opted to sleep the Mac followed by a forced shutdown and voila, back to business. Neither of these solutions worked for me. I would like to know if anyone has a another solution that has worked. Maybe you can check if booting an OSX installation pendrive, to see if the graphics start to work.

The display works just fine until the OS starts to boot then it goes to black with a white cursor immediately. Did you ever find a solution? Not sure if this caused the problem I had on the Macbook Pro but what worked like a charm was the first solution in this article. Connect to power outlet. The computer chimed and when it booted WaHoo, the screen was back. I did this connected to a secondary monitor so I could see what was happening. The laptop screen booted first, as usual. Thank you Will! None of these. Worked for me at all: Any last suggestions?

We are on vacation and I need to login for work! None of these worked for me at all: Try booting with an external display connected. Your inbuilt display may actually have failed. I had this issue with a white iBook a while back…. I am not sure if this is connected but prior to my initial upgrade the boot up to the log on screen took 25 seconds or so, with the password entered the main screen was a further 3 seconds. After the upgrade it seemed to work the other war around, the log on screen was there in seconds, enter the password and it took 20 seconds to get to the home page, following the recent upgrade it has changed again, a black screen with the progress bar taking 15 to 20 seconds to get to the log on page, the password is entered and the home page is 2 seconds away.

I will try the suggestions posted above. I got the black screen but it booted normally otherwise. Black screen, white progress bar. I actually thought i looked cooler than the normal boot. If it works, leave it alone. Since the upgrade to YOSe and second ed, nothing bad has happened apart from the odd sudden shutdown during web surf … otherwise stable during heavy editing on iMovie brilliant new version for me… always found FCP a tad OTP for my professional needs and chuffed with all other apps in use… well done guys for the constant upgrades and as usual user friendly improvements …… Maje.

By mistake on installing. Win7 on parallele something went wrong. And now have black screen. When push power button. I hear fun noise. Mac is run. But black screen. I try. Both solution mentioned nothing help I try other. Solution from web same. Any help will be appreciated Thx. This is now a frequent problem for users of Mavericks and Yosemite, I tried everything with my Macbook Pro but nothing worked. Even reloading Yosemite using one of the recovery tricks.

A Solution for MacBook Pro Booting to a Black Screen

Finally I decided to Pay for Apple Support and was pleasantly surprised to find that there is no charge for help with this problem on these two operating systems. The first technician took me through all the things I had done, trying to boot into Safe Mode, trying to boot into Recovery Mode even getting to the failure point and entering my password in case it was just hidden.

He then got a senior tech on the line and she said she could fix this in 10 mins as it was a known issue. She had me power on and hold down the command and S keys. Keep holding the keys until the screen fills with a lot of Dos like code. At this point she dictated 3 lines of text with things like plst and library etc, sorry I cannot remember much of it.

Then we powered on and off and again the screen went black but she told me to just keep hitting a few random keys and lo and behold the system came back up and is now OK. The problem as I understand it is a corruption in some plist logon type files which she had me delete and on the next boot the Mac rebuilds them correctly.

Good Hunting! I am reading through my error logs, and I am seeing this same plist error. I just do not know how to fix it. Guess I will call Apple and hope that somebody there gives 2 chits enough to help me fix it properly this time! Thanks for the post! Thanks for the suggestions, but none of these methods have helped. Gotta go see a genius I guess.

I decided to do a new clean installation of Yosemite and then restore my userdata. Everything went fine and I was happy with my newly installed MBA until a couple of days ago. Again I got the black screen after waking up from sleep: Anyone have an idea what the issue can be? Had this issue but called apple support to fix it in 2 steps. Steps to solve issue MacBook turns on makes the sound but no display or cursor, just a dark screen.

All replies

Thanks, me and the oldest boy rolled thru all other suggestions, until finally this one worked. Thank you, thank you!!!!!!!!!!!!!!!!!!! Thanks a lot!! This worked, after the second noise the screen was still black then I forced it to shut down, turned it back on and the problem was solved! Thanks for sharing your solution, after trying several methods this was the definitive solution to my case!

Thank you so much! I thought I was either gonna have to pay a TON of money to fix my computer, or throw it away! This worked for me! This one worked! Happened to me just after using the migration assistant. Guessing it could be related to dual monitors on the old Mac Pro, but not sure. Thank you!! Worked first try. Saved my day! Will never panic again when I see the black screen and hear the fan working so hard. Thanks again!!! Yippeee OMG you saved my life! Fingers crossed it will be ok now for ever! I think the second tip is working for me!

My computer is still turning back on.

Black Screen Solution for any Mac

Do you think this problem might have been caused by recently installing fluux that program that dims the blue light on your computer at night? Wow jeszica!!! You are my life savor!! The only result that worked for me after searching all thru YouTube and Google for help! Thanks Jeszica!! You Rock! After trying all other suggestions as they come, yours work like a charm. Just had a customer who had this issue, turned on the MBP The flashlight on the screen in a dark room reveled the login page as others sites have stated, once I entered the new password I created on other attempts to fix the issue I was directed to the Keychain page where I entered the orignal password in the update Keychain password supplied by the customer and viola, straight back in and restarting as per normal.

No other issues and the laptop screen lights up as usual on startup and sometime when taken out of sleep mode but goes dark again within minutes. Tried all of the resets, no go. Any other suggestions out there?! Thanks OSXDaily! There are a few factors to the problem listed above, and the solutions for each of those should definitely be tried at least three times.

I was panicking when none of the solutions worked, and then I realized my MacBook was severely overheated. Nearly scalded my hands holding it. I started it up, removed all peripherals, put it to sleep clamshell mode and left it on the floor for 5 minutes cos all the cool air-conditioning made the floor really cold.

Then when I picked it up again after it was all cooled, the screen just… worked. No flaws. Here are some points to consider:. Turn it off, or turn it on and put it to sleep. Apply something cold not ice please, more like blow at it with a fan or something to the bottom of the MacBook. Again, check your MacBook and take care of it.

Try all of these at once when your MacBook is at optimal working temperature. Then schedule a day to bring it to an authorized Apple Service Provider. Yes, it got that bad…. But I learnt to understand and fix this MacBook on my own.


  • skype chat logs mac location?
  • mac lightful charged essence review.
  • how to type e with two dots on mac.

Surely, prevention is better than cure. This aluminium unibody does a horrible job at ventilation. So the air comes out from the keyboard, apart from the exhaust in the joint. Keyboard covers are the one-way ticket to suffocating your Mac. Way to go Apple, sacrificing so much for aesthetics. This happened to me today. I went to the Apple store and they had a two hour wait. I was so tempted to just toss the computer in the trash. I got on my iPhone and found this solution.

Works fine now. The second sequence worked for me. Thank you very much for the the. So here it is, and from the bottom of my heart: Same issue, took me a few days to resolve. Try this sequence, stopping whenever you get the white screen and chime to display upon boot up. Get it back to grey screen and follow these instructions: Repair until you get the OK, then go back into disk utility apps repair and run it in there a few times.

It worked for me, I doubted it but it did. Once i just smashed my keyboard after a few hours and that somehow worked too… do not suggest that last one. Upon getting it to load, have a hard drive ready and start grabbing the important stuff. Best of luck. I tried rebooting with option command p r and it made the chime. Any suggestions? Hi- have tried all and this is not working for me. My MacBook pro was purchased in so very old. It starts but black screen. I have tried all suggestions above.

Any one have anything else to suggest? Hello Lisa. I am having the same problem. By looking at the date you wrote this post, I believe the problem is already resolved. Any advise on this? Omg thank you so much Jessica it finally worked for me! Unusual to have problems with Mac!! Obviously a fault with the Apple software!! Thank you Jeszica!! I tried all suggestions and nothing worked until I pressed power and then held option, command, P,R until the power sound came on about 3 times and then finally the screen restored.

Had to get a torch to shine it at the screen though to get through the secure login! What is previously black becomes just about visible. It worked!!! I refer to the original suggestion of control option shift power button, followed by normal press of power button. Lately it just kills itself to black. Many thanks, especially as am about to go on a work trip and need my computer! Rebooting the PRAM worked for me! Thanks guys!

I was wondering what the heck as my Macbook Air is only two days old!! Thanks again! I was wondering what happened to my Macbook Pro is only 15 days old!! PRAM method worked after trying the previous two. Thank you. So it seems anything will work at some time or other I think CloudyZack has it nailed these get too HOT wait till it cools down then try any of the methods listed I am going to drill some holes in mine just under the fans better ventilation is sure to help. I tried the methods described with no luck.

He had me:. It is ONE line with a space between loginwindow. This worked for me and got me to the login page. The tech said the code just sets your computer to find the last working startup. Hopefully it will continue to work: Good Luck! Mischa, Thank you so much! Your code here just got me my computer back!!! I had a black screen and could see pointer, but that was it. I followed your instructions and bam, the login screen came up!!!

So excited!! The above method worked for me.

How to Fix iMac Screen Goes Black

Nothing worked. I even reinstalled Yosemite from the recovery option twice and nothing. But this last option worked. Thank you a million. I had this problem crop up after I restored my system from a Time Machine backup. The above was the fix! I tried several times all 3 solutions: Thanks so much. Worked great. Nothing had worked and was loosing hope until I found your post. Thanks a ton. After fiddling with brightness had that issue before I found this article and tried 3 solutions one after the other. Thank you so very much I went through all three of the props that was display and the last one worked appreciate you a great deal.

I had the same thing happen and tried all the steps, 1. Still, black screen. Black screen. Still the black screen. Still black screen. Back to recovery mode, reinstalled mavericks. Still, no success. In conclusion, I have tried everything but the apple service, the black screen arrived out of nothing and remains here, tormenting me. Ok, so as I said, non of the 7 solutions above worked for me, here is what did: I found this solution on another troubleshooting forum which dealt with the same problem. Here are the steps that brought me back everything exactly how I left it: Turn off your Mac by pressing the power button until your Mac shuts down.

Turn your Mac back on and hold the shift button.

How to fix my MacBook Pro Booting to a Black Screen

You will see a loading bar fill up and then your screen will go back to black with your cursor visible. Enter the first letter of your user name and hit enter 4. Enter your password and hit enter 5. The beach all will start turning. If your Mac goes to sleep mode wake it back up as usual.

An install window will pop up, for an update. Follow the steps to set up the installation. You end up back at your home screen as you left it. I hope it helps! Good luck and hang in there! I had the problem described above but none of the solutions worked, and then when I moved the MacBook to connect an external monitor the problem disappeared.

Now I know my circumstances are very rare. I had stacked the one I was fixing on top of the other one with the lid closed. So the top MacBook thought the screen was closed and so, turned it off. Lift the top MacBook off the bottom one and the problem goes away. This was driving me crazy!!! Scott, you saved me and my macbook: Tried everything and was just about to give in for the night and read your comment… Thanks very much!

After attempting ALL of the suggested fixes multiple time I finally called tech support. Ellen had me hit the power button and then hit the shift key which started the computer in Safe Mode. It brought up the login dialog box and once I entered my password the computer brought up my regular startup screen. I clicked on the apple in the top left corner of the screen and then hit restart. It brought up the login screen again and once I logged in everything was back to normal — running real slow after loading Yosemite.

At least now I can do my taxes: I tried all three options a couple of times without luck. It worked. Interestingly when the screen was happily visible and I could log on a critical is update was ready. The one that seemed to work so far is a hybrid of two. In safe mode the bar finished loading and I logged in, retarded and the Mac asked me to install a software update, I did. This is the second time it happened on startup. The last PRAM reset worked like a charm and booted my mac to life! Sometimes the SMC worked, sometimes the PRAM zap worked, but mostly the old unplug the machine from power, close the lid and wait a few minutes was the key for me.

When I booted into safe mode I was able to backup the drive and use a second monitor for a number of hours, so Apple support walked me through trashing a slew of preference files and while they were watching my screen it happened again- black screen at startup. So they recommended I reinstall the OS. I went for a really clean install and erased my already backed up drive and started the 2 hour Yosemite reinstall. I must have missed a crucial step because when the machine restarted I saw a folder with a question mark, and when I tried to restart into recovery mode all I get is the chime and a black screen.

I made the trip to my nearest Apple Store and was told about the video card replacement program. It started a few days later here in Japan, so I was told to call Apple on the start day and report my problem. The next day Sat. I am happy to say my external monitor once again works, and I have had no re-boots or black screens knock on wood! Thank you Apple better late than never! The only solution that worked was to use time machine, had a backup on a hard disk. Wish you success. The exact issue I was experiencing was that my machine would boot to a black screen no Apple logo and not display the login screen until I slept the computer and woke it back up.

After trying everything mention above , still got black screen on my MacBook pro. It worked and I got my MacBook screen again and got relief: Thank goodness this worked. None if the three worked for me. My screen went black after I had the Mac book pro standing on edge and it fell over only a few inches to laying flat. When I reboot I get a lighter but still black screen. Did I frie some kind of screen connection? I have read all of the comments here and attempted all the solutions and nothing works. My screen is black. However, the white light comes on in the front when the power button is pressed on.

So when everyone is describing a black screen and then describing one of the solutions, are you describing a screen that is actually clicking ON but has only a black background or a black screen that appears to be off? Again, I have attempted every solution described above and nothing seems to work.

That black screen scared me as I just got my MacBook 2 months ago! Thanks so much for the tip — saved my weeks outlook! This is the second MacBook Pro Retina to do this to me. I bought my first one in December , it did this within a month. That was about a month and a half ago and it just did it again. I tried all three of the above solutions and was so happy when the PRAM reset worked! I have a pro that this happened to today.

This morning I tried all of the different solutions posted here and elsewhere, including the pram reset a number of times without success. But after leaving it for a few hours and then guessing when to hit pram as I wasnt getting chimes, it has eventually worked. I tried the first trouble shooting option and I heard the noise it makes and the fan start up then the screen flickered and it shut off.

Now it wont turn back on. I do not know what to do at this point. Thank you so much for this article, third option worked perfectly!! Was having a mild panic as Mac exactly 1 year old today so warranty typically just finished. Thanks for the fix, very grateful. Thank you, thank you, thank you!!! The first 2 suggestions did not work for me but the second one did.

This happened to me once before and the genius bar fixed in in 10 minutes but this time I am in Vanuatu where there is no genius bar. The third suggestion worked like a charm: I thought about all the documents I just saved and how much time it was going to take to re-write them. Hmmm…I should have at least printed them. A big lesson! I tried everything holding all kinds of combinations of letters with all my fingers twisted but nothing worked until I did the PRAM Reset exactly as said. My husband put his finger over his mouth….

Thanks so much whoever from genius bar posted all the solutions. Option 3 worked for me. Just keep in mind, it may take a little while to hear that second home. Try and be patient.